|
NIOSH 7600 |
Determination of Hexavalent Chromium, Cr(VI) |
|
EPA 1311 |
Toxicity Characteristic Leaching Procedure (TCLP) |
|
EPA 1312 |
Synthetic Precipitation Leaching Procedure (SPLP) |
|
ASTM D4208 |
Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method |
|
EPA 9212 |
Potentiometric Determination of Chloride in Aqueous Samples with Ion-Selective Electrode |
|
EPA 3010A |
Acid Digestion of Aqueous Samples and Extracts for Total Metals Analysis by ICP Spectroscopy |
|
Hach Method 10206 |
Determination of Nitrate Nitrogen |
|
EPA 3050B |
Acid Digestion of Soils, Sediments, and Sludges for ICP Metals Analysis |
|
ASTM D6349 |
Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma- Atomic Emission Spectrometry |
|
ASTM D720/D720M |
Determination of the Free Swelling Index of Coal |
|
ASTM D2639/D2639M |
Determination of the Plastic Properties of Coal by Gieseler Plastometer |
|
ASTM D5865 |
Determination of the Gross Calorific Value (BTU) |
|
ASTM D4239 |
Determination of the Total Sulfur in Organic Matrices |
|
ASTM D2013/D2013M |
Preparation of Coal and Coke Samples for Analysis |
|
ASTM D5515 |
Determination of the Swelling Properties of Bituminous Coal using a Dilatometer |
|
ASTM D5373 |
Determination of the Total Carbon, Hydrogen, and Nitrogen in Organic Matrices |
|
ASTM D5263 |
Determination of Degree of Oxidation in Coal by Alkali Extraction |
|
ASTM D293/D293M |
Sieve Analysis of Coke |
|
ASTM D3175 |
Determination of Volatile Matter |
|
ASTM D3402/D3402M |
Coke Tumbler Test |
|
ASTM D4749 |
Sieve Analysis and Size Designation of Coal |
|
ASTM D3173 |
Determination of % Residual Moisture |
|
ASTM D2961 |
Determination of Single-Stage Moisture |
|
ASTM D2318 |
Determination of Quinoline-Insoluble (QI) Content in Tar & Pitch |
|
40 CFR 60.648 |
Determination of Hydrogen Sulfide in Acid Gases and Gas Mixtures |
|
ASTM D5341 |
Determination Method for Measuring Coke Reactivity Index (CRI) and Coke Strength after Reaction (CSR) |
|
ASTM D291 |
Determination of Bulk Density; Cubic Foot Weight of Crushed Bituminous Coal |
|
ASTM C25 |
Determination of Inorganic Sulfur and Carbon of Limestone, Quicklime, and Hydrated Lime |
|
ASTM D7348 |
Determination of Loss on Ignition |
|
EPA 9001 |
Determination of Water in Waste Materials By Quantitative Calcium Hydride Reaction |
|
XRD (In-House Method) |
XRD (X-Ray Diffraction), Quantitative Analysis |
|
ASTM F2075 |
Engineered Wood Fiber for Use as a Playground Safety Surface |
|
ASTM D1946 |
Analysis of Reformed Gas by Gas Chromatography |
|
ASTM D7582 |
Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
|
ASTM D2492 |
Forms of Sulfur in Coal |
|
ASTM C136 / AASHTO T27 |
Sieve Analysis of Fine and Coarse Aggregates |
|
ASTM D5832 |
Volatile Matter Content of Activated Carbon Samples |
|
ASTM D3038 |
Drop Shatter Test for Coke |
|
ASTM D3987 |
Shake Extraction of Solid Waste with Water |
|
ASTM D441 |
Tumbler Test for Coal |
|
ASTM D3682 |
Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
|
ASTM C33 |
Concrete Aggregates |
|
ASTM D5057 |
Screening Apparent Specific Gravity and Bulk Density of Waste |
|
EPA 3005A |
Acid Digestion of Waters for Total Recoverable or Dissolved Metals for Analysis by Flame Atomic Absorption (FLAA) or Inductively Coupled Plasma (ICP) Spectroscopy |
|
ASTM D1429 |
Specific Gravity of Water and Brine |
|
ASTM E871 |
Moisture Analysis of Particulate Wood Fuels |
|
ASTM D1102 |
Ash in Wood |
|
ASTM E872 |
Volatile Matter in the Analysis of Particulate Wood Fuels |
|
ASTM D3802 |
Ball-Pan Hardness of Activated Carbon |
|
ASTM C357 |
Bulk Density of Granular Refractory Materials |
|
ASTM D4189 |
Silt Density Index (SDI) of Water |
|
ASTM C471 |
Chemical Analysis of Gypsum and Gypsum Products (Metric) |
|
AASHTO T219 |
Testing Lime for Chemical Constituents and Particle Sizes |
|
EPA 1310 |
Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test |
|
EPA 1313 |
Liquid-Solid Partitioning as a Function of Extract pH Using a Parallel Batch Extraction Procedure |
|
EPA 1314 |
Liquid-Solid Partitioning as a Function of Liquid-Solid Ratio for Constituents in Solid Materials Using An Up-Flow Percolation Column Procedure |
|
EPA 1315 |
Mass Transfer Rates of Constituents in Monolithic or Compacted Granular Materials Using a Semi-Dynamic Tank Leaching Procedure |
|
EPA 1316 |
Liquid-Solid Partitioning as a Function of Liquid-to-Solid Ratio in Solid Materials Using a Parallel Batch Procedure |
|
EPA 1320 |
Multiple Extraction Procedure |
|
ASTM D2166 |
Unconfined Compressive Strength of Cohesive Soil |
|
ASTM D698 |
Laboratory Compaction Characteristics of Soil Using Standard Effort |
|
ASTM D4607 |
Determination of Iodine Number of Activated Carbon |
|
ASTM D2867 |
Moisture in Activated Carbon |
|
ASTM C40 |
Organic Impurities |
|
ASTM C641 |
Iron Staining |
|
ASTM C142 |
Clay Lumps & Friable Particles |
|
ASTM C29 |
Loose Unit Weight & Voids in Agg / Loose Bulk Density |
|
AASHTO T11 & T27 |
Sieve Analysis |
|
ASTM C604 |
True Specific Gravity |
|
ASTM C110 |
Apparent Specific Gravity |
|
ASTM D4327 |
Water Leachable Halides |
|
ASTM D516 |
Sulfate Ion in Water |
|
MIL-STD-2041D |
Control of Detrimental Materials |
|
AASHTO T194 |
Determination of Organic Matter in Soils by Wet Combustion
|
|
AASHTO T289 |
Determining pH of Soil for Use in Corrosion Testing
|
|
AASHTO T290 |
Determining Water-Soluble Sulfate Ion Content in Soil
|
|
AASHTO T291 |
Determining Water-Soluble Chloride Ion Content in Soil
|
|
ASTM C1218 |
Water-Soluble Chloride in Mortar and Concrete |
|
ASTM C127 / AASHTO T85 |
Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
|
|
ASTM C128 / AASHTO T84 |
Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
|
ASTM D167 |
Apparent and True Specific Gravity and Porosity of Lump Coke
|
|
ASTM D1762 |
Chemical Analysis of Wood Charcoal |
|
ASTM D2216 |
Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
|
|
ASTM D2270 |
Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
|
|
ASTM D2622 |
Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
|
ASTM D2974 |
Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
|
|
ASTM
D3176 |
Standard Practice for Ultimate Analysis of Coal and Coke |
|
ASTM D3302 |
Total Moisture in Coal |
|
ASTM D3684 |
Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method (Withdrawn 2014) |
|
ASTM D3761 |
Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
|
|
ASTM D4052 |
Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
|
|
ASTM D4176 |
Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
|
|
ASTM D4326 |
Major and Minor Elements in Coal Ash By X-Ray Fluorescence
|
|
ASTM D5185 |
Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
|
|
ASTM D5673 |
Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
|
|
ASTM D5762 |
Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
|
|
ASTM D6481 |
Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
|
|
ASTM D7042 |
Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
|
|
ASTM D7359 |
Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
|
|
ASTM D7757 |
Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
|
|
ASTM D8083 |
Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
|
|
ASTM D8214 |
Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
|
|
ASTM E1755 |
for Ash in Biomass
|
|
ASTM E1757 |
Standard Practice for Preparation of Biomass for Compositional Analysis
|
|
ASTM E711 |
Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
|
ASTM E776 |
Determination of Forms of Chlorine in Refuse-Derived Fuel
|
|
ASTM E830 |
Ash in the Analysis Sample of Refuse-Derived Fuel
|
|
ASTM E926 |
Standard Practices for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals (Withdrawn 2002)
|
|
AWWA B604 |
Granular Activated Carbon
|
|
EN-15103 |
Solid biofuels - Determination of bulk density
|
|
EN-15297 |
Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
|
|
EPA 1030 |
Ignitability of Solids
|
|
EPA 3015A |
Microwave Assisted Acid Digestion of Aqueous Samples and Extracts
|
|
EPA 3051A |
Microwave Assisted Acid Digestion of Sediments, Sludges, and Oils
|
|
EPA 3052A |
Microwave Assisted Acid Digestion of Siliceous and Organically Based Matrices
|
|
EPA 6020B |
Inductively Coupled Plasma - Mass Spectrometry
|
|
EPA 7.3.3.2 |
Reactive Cyanide, Solid Wastes
|
|
EPA 7.3.4.2 |
Reactive Sulfide (Solid Wastes)
|
|
EPA 7470A |
Mercury in Liquid Wastes (Manual Cold-Vapor Technique)
|
|
EPA 8260D |
Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS)
|
|
EPA 8270E |
Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC-MS)
|
|
EPA 9034 |
Titrimetric Procedure for Acid-Soluble and Acid-Insoluble Sulfides
|
|
EPA 9095B |
Free Liquids Test
|
|
Hach
10242 |
Nitrogen, Simplified TKN (s-TKN™)
|
|
ISO 10694 |
Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
|
|
ISO 6561 |
Fruits, vegetables and derived products - Determination of cadmium content
|
|
Lloyd Kahn Method |
Determination of Total Organic Carbon in Sediment (Lloyd Kahn Method)
|
|
PA-OVERBURDEN |
Pennsylvania Overburden Sampling and Testing
|
|
Walkley Black |
Standard operating procedure for
soil organic carbon - Walkley-Black method
Titration and colorimetric method
|
|
EPA 9040C |
pH Electrometric Measurement |
|
EPA 9045D |
Soil and Waste pH |
|
NEMI 4500-H+B |
pH in Water by Potentiometry |
|
EPA-NERL 170.1 |
Temperature by Thermometer |
|
SM 2550B |
Temperature of Water |
|
EPA 1664A |
N-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated N-Hexane Extractable Material (SGTHEM; Non-polar Material) by Extraction and Gravimetry |
|
EPA 3535A |
Solid-Phase Extraction (SPE) |
|
EPA-NERL 300.0 |
Inorganic Anions by Ion Chromatography |
|
EPA 9056A |
Determination of Inorganic Anions by Ion Chromatography |
|
EPA 6010D |
Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) |
|
EPA
365.3 |
Phosphorous, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) |
|
SM
4500-P |
Phosphorus by Ascorbic Acid |
|
Hach
10209/10210 |
Phosphorus, Reactive (Orthophosphate) and Total |
|
EPA
350.1 |
Ammonia Nitrogen by Semi-Automated Colorimetry |
|
SM
4500-NH3 |
Nitrogen (Ammonia) |
|
Hach
10205 |
Nitrogen, Ammonia |
|
SM
4500-NO2-B |
Nitrite by Colorimetry |
|
Hach
8507 |
Nitrite |
|
EPA
410.4 |
Chemical Oxygen Demand by Semi Automated Colorimetry |
|
SM 5220D |
Chemical Oxygen Demand |
|
Hach
8000 |
Oxygen Demand, Chemical |
|
EPA
180.1 |
Turbidity by Nephelometry |
|
SM 2130B |
Turbidity by Nephelometry |
|
EPA-NERL
375.4 |
Sulfate by Turbidity |
|
SM
4500-SO42 |
Sulfate |
|
EPA 9038 |
Sulfate (Turbidimetric) |
|
Hach
8051 |
Sulfate |
|
ASTM
D3174 |
Ash in the Analysis Sample of Coal and Coke from Coal |
|
ASTM
D4422 |
Ash in Analysis of Petroleum Coke |
|
ASTM
D409 |
Grindability of Coal by the Hardgrove-Machine Method |
|
ASTM D6357 |
Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by ICP-AES, ICP-MS, and GFAAS |
|
SM 2540B |
Total Solids in water dried at 103-105 C |
|
SM 2540C |
Total Dissolved Solids Dried at 180oC |
|
SM 2540D |
Total Suspended Solids Dried at 103-105o |
|
EPA-NERL 160.1 |
Filterable Residue by Drying Oven |
|
EPA-NERL 160.2 |
Non-filterable Residue by Drying Oven |
|
EPA-NERL 160.3 |
Total Residue by Drying Oven |
|
EPA-NERL 160.4 |
Volatile Residue by Muffle Furnace |
|
EPA-NERL 120.1 |
Conductance by Conductivity Meter |
|
EPA 9050A |
Specific Conductance |
|
SM 2510 |
Conductivity |
|
ASTM C1301 |
Major and Trace Elements in Limestone and Lime by ICP & AA
|
|
ASTM D5600 |
Trace Metals in Petroleum Coke by ICP-AES |
|
EPA 7473 |
Mercury in Solids and Solutions by Thermal Decomposition, Amalgamation, and Atomic Absorption Spectrophotometry |
|
ASTM
D5003 |
Hardgrove Grindability Index (HGI) of Petroleum Coke |
|
ASTM
D2234 |
Collection of a Gross Sample of Coal |
|
ASTM
D6883 |
Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
|
ASTM
D1426 |
Ammonia Nitrogen In Water |
|
ASTM
D3872 |
Ferrous Iron in Iron Oxides |
|
ASTM
E246 |
Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
|
ASTM
D95 |
Water in Petroleum Products and Bituminous Materials by Distillation |
|
ASTM
D2983 |
Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
|
ASTM
E394 |
Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
|
ASTM
E1131 |
Compositional Analysis by Thermogravimetry |
|
ASTM D6722 |
Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis |
|
EPA 9071B |
n-Hexane Extractable Material (HEM) for Sludge, Sediment, and Solid Samples |
|
EPA 3546 |
Microwave Extraction |
|
Hach 10056 |
Oil and Grease |
|
ASTM D482 |
Ash from Petroleum Products |
|
ASTM D128 |
Analysis of Lubricating Grease |
|
ASTM D874 |
Sulfated Ash from Lubricating Oils and Additives |
|
ASTM E449 |
Analysis of Calcium Chloride |
|
Hach 8338 |
Hardness, Total, Sequential Titration Method with EDTA |
|
ASTM D93 |
Flash Point by Pensky-Martens Closed Cup Tester |
|
EPA 1010A |
Flash Point by Pensky-Martens Closed Cup Tester |
|
ASTM D56 |
Flash Point by Tag Closed Cup Tester |
|
SM 2310B |
Acidity by Titration |
|
ASTM D1067 |
Acidity or Alkalinity of Water |
|
SM 2320B |
Alkalinity by Titration |
|
ASTM
D6316 |
Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke |
|
EPA 9060A |
Total Organic Carbon |
|
ASTM
D4972 |
pH of Soils |
|
ASTM
D3370 |
Sampling Water from Flowing Process Streams |
|
ASTM
D1452 |
Soil Exploration and Sampling by Auger Borings |
|
ASTM D75 |
Sampling Aggregates |
|
ASTM E300 |
Sampling Industrial Chemicals |
|
ASTM
D1552 |
Sulfur in Petroleum Products by High Temperature Combustion and IR or TCD |
|
ASTM
E255 |
Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
|
ASTM
C806 |
Restrained Expansion of Expansive Cement Mortar |
|
ASTM C117 / AASHTO T11 |
Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
|
AASHTO T19 |
Bulk Density (“Unit Weight”) and Voids in Aggregate |
|
ASTM C88 / AASHTO T104 |
Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate |
|
ASTM C206 |
Standard Specification for Finishing Hydrated Lime |
|
ASTM C1365 |
Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
|
ASTM C642 |
Density, Absorption, and Voids in Hardened Concrete |
|
ASTM D6928 |
Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
|
|
ASTM D7428 |
Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
|
|
EPA 1627 |
Kinetic Test Method for the Prediction of Mine Drainage Quality |
|
EPA 440 |
Ore mining and dressing industry to control wastewater discharges |
|
ASTM E11 |
Woven Wire Test Sieve Cloth and Test Sieves |
|
ASTM D512 |
Chloride Ion In Water |
|
ASTM D4373 |
Rapid Determination of Carbonate Content of Soils |
|
ASTM D4292 |
Determination of Vibrated Bulk Density of Calcined Petroleum Coke |
|
ASTM D2638 |
Real Density of Calcined Petroleum Coke by Helium Pycnometer |
|
ASTM D4072 |
Toluene-Insoluble (TI) Content of Tar and Pitch |
|
ASTM D2416 |
Coking Value of Tar and Pitch (Modified Conradson) |
|
ASTM D7263 |
Density and Unit Weight of Soil Specimens |
|
ASTM E359 |
Analysis of Soda Ash (Sodium Carbonate) |
|
EPA 1050C |
Substances Likely to Spontaneously Combust |
|
UN TEST N.4 |
Self-heating substances |
|
TAPPI T617 |
Analysis of lime, Test Method T 617 cm-23 |
|
TAPPI T618 |
Analysis of lime, Test Method T 618 cm-24 |
|
ASTM C311 |
Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete |
|
ASTM D4806 |
Specification for Denatured Fuel Ethanol |
|
ASTM D5709 |
Sieve Analysis of Petroleum Coke |
|
ASTM D5142 |
Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures |
|
ASTM D7503 |
Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
|
ASTM C114 |
Chemical Analysis of Hydraulic Cement |
|
ASTM C188 |
Density of Hydraulic Cement |
|
ASTM E1915 |
Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
|
ASTM E2941 |
Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion |
|
ASTM D5187 |
Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction |
|
ASTM D7439 |
Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
|
ASTM D5291 |
Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
|
ASTM D3867 |
Nitrite-Nitrate in Water |
|
ASTM D240 |
Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
|
AOAC 955.01 |
Neutralizing value for liming materials |
|
TMECC (2001) |
Test Methods for the Examination of Compost and Composting |
|
ASTM E534 |
Chemical Analysis of Sodium Chloride |
|
ASTM E291 |
Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) |
|
ASTM D1997 |
Fiber Content of Peat and Organic Soils by Dry Mass |
|
ASTM D5715 |
Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) |
|
ASTM
D6913 |
Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
|
ISO
16967 |
Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
|
ASTM
C602 |
Agricultural Liming Materials |
|
ASTM D1618 |
Carbon Black Extractables—Transmittance of Toluene Extract |
|
ASTM D1510 |
Carbon Black—Iodine Adsorption Number |
|
AOAC
965.09 |
Nutrients (Minor) in Fertilizers: Atomic Absorption Spectrophotometric Method |
|
ASTM D4698 |
Total Digestion of Sediment Samples for Chemical Analysis of Various Metals |
|
ISO 14235 |
Determination of organic carbon by sulfochromic oxidation |
|
ASTM C207 |
Hydrated Lime for Masonry Purposes |
|
ASTM C123 |
Lightweight Particles in Aggregate |
|
ISO 20978 |
Liming material — Determination of neutralizing value — Titrimetric methods |
|
ASTM D501 |
Sampling and Chemical Analysis of Alkaline Detergents |
|
ASTM E1787 |
Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography |
|
ISO 5074 |
Hard coal — Determination of Hardgrove grindability index |
|
ISO 16878 |
Iron ores — Determination of metallic iron content — Iron(III) chloride titrimetric method |
|
ASTM B215 |
Sampling Metal Powders |
|
ASTM D7876 |
Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants |
|
ASTM E829 |
Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
|
ASTM D4442 |
Direct Moisture Content Measurement of Wood and Wood-Based Materials |
|
ASTM D3838 |
pH of Activated Carbon |
|
EPA SW-846 Method 5050 |
Bomb Preparation Method for Solid Waste |
|
ASTM C702 |
Reducing Samples of Aggregate to Testing Size |
|
ASTM C1603 |
Measurement of Solids in Water |
|
ASTM D8088 |
Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy |
|
ASTM E2371 |
Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
|
ASTM D5890 |
Swell Index of Clay Mineral Component of Geosynthetic Clay Liners |
|
ASTM D2866 |
Total Ash Content of Activated Carbon |
|
ASTM D2854 |
Apparent Density of Activated Carbon |
|
ASTM C97 |
Absorption and Bulk Specific Gravity of Dimension Stone |
|
ASTM C977 |
Quicklime and Hydrated Lime for Soil Stabilization |
|
ASTM E1534 |
Determination of Ash Content of Particulate Wood Fuels |
|
ASTM E1756 |
Determination of Total Solids in Biomass |
|
ASTM E897 |
Volatile Matter in the Analysis Sample of Refuse-Derived Fuel |
|
ASTM E949 |
Total Moisture in a Refuse-Derived Fuel Laboratory Sample |
|
ASTM E828 |
Designating the Size of RDF-3 from the Results of Sieve Analysis |
|
AASHTO T327 |
Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
|
AASHTO T288 |
Determining Minimum Laboratory Soil Resistivity |
|
ASTM C561 |
Ash in a Graphite Sample |
|
ASTM C562 |
Moisture in a Graphite Sample |
|
ASTM D4892 |
Density of Solid Pitch (Helium Pycnometer Method) |
|
ASTM B923 |
Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry |
|
ASTM D5965 |
Density of Coating Powders |
|
ASTM D6970 |
Collection of Calcined Petroleum Coke Samples for Analysis |
|
ASTM D4931 |
Gross Moisture in Green Petroleum Coke |
|
ASTM D8145 |
Sampling of Green Petroleum Coke |
|
ASTM D6374 |
Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
|
ASTM D6969 |
Preparation of Calcined Petroleum Coke Samples for Analysis |
|
ASTM D4421 |
Volatile Matter in Petroleum Coke (Withdrawn) |
|
ASTM F3419 |
Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) |
|
ASTM E3294 |
Forensic Analysis of Geological Materials by Powder X-Ray Diffraction |
